Hledali jste: Industrial Physics

Dodavatel: Industrial Physics

Popis: This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Dodavatel: Industrial Physics

Popis: The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Katalogové číslo: (SIMEVF2199)

Dodavatel: Industrial Physics

Popis: Lory viscosity cup designed for quick measurements on location or during production processes.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: Industrial Physics

Popis: Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Dodavatel: Industrial Physics

Popis: Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Dodavatel: Industrial Physics

Popis: The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Dodavatel: Industrial Physics

Popis: Durometer, Weight set, 4 kg, for Durometer shore D

Dodavatel: Industrial Physics

Popis: Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Dodavatel: Industrial Physics

Popis: RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Katalogové číslo: (SIMESP1560)

Dodavatel: Industrial Physics

Popis: Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (SIMELI0010)

Dodavatel: Industrial Physics

Popis: The MaxiLigno are equipped with the latest technology for precision and easy handling.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (SIMELD3059)

Dodavatel: Industrial Physics

Popis: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (SIMELD0560)

Dodavatel: Industrial Physics

Popis: This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: Industrial Physics

Popis: These cylindrical bend testers are used to determine the elasticity, adhesion and elongation of paint on metal.

Dodavatel: Industrial Physics

Popis: Stainless steel spiral applicators with a film width of 320 mm are round bars tightly wound with stainless steel wire. The diameter of the wire, in wound form, regulates the thickness of the coating.

Dodavatel: Industrial Physics

Popis: Accessories for washability tester, Universal clamp holder