Tisk…

Hledali jste: LABCONCO


939  výsledků nalezeno

SearchResultCount:"939"

Sort Results

Zobrazit seznam Rychlý náhled (novinka)

Ohodnoťte výsledky hledání

Dodavatel: LABCONCO
Popis: SpillStopper work surface, left side cupsink cutout, 1219×762×32 mm, 50 kg

Dodavatel: LABCONCO
Popis: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Nové řešení transparentnosti pro evropské zákazníky

Všimli jste si naší nově zlepšené viditelnosti rozmístění zásob u pokladny?

Zjistěte více

Zlepšení rozmístění zásob

Dodavatel: LABCONCO
Popis: Flexible duct connections reduce vibration between the blower and PVC ductwork.

Dodavatel: LABCONCO
Popis: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Dodavatel: LABCONCO
Popis: Glassware washing machines, Upper spindle rack with slide rails

Dodavatel: LABCONCO
Popis: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Environmentally Preferable

Dodavatel: LABCONCO
Popis: Stolní lyofilizátory FreeZone® jsou navrženy pro lyofilizaci lehkého až středního množství vzorků. Kompaktní design je ideální pro laboratoře s omezenou podlahovou plochou.

Environmentally Preferable

Katalogové číslo: (LBCP9000732)
Dodavatel: LABCONCO
Popis: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.
Měrná jednotka: 1 * 1 KS


Dodavatel: LABCONCO
Popis: Accessory for Freeze Dryer, FreeZone®

Dodavatel: LABCONCO
Popis: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Dodavatel: LABCONCO
Popis: Storage cabinet accessory, Interior shelf kit, 61 mm Protector® acid storage cabinets

Dodavatel: LABCONCO
Popis: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Dodavatel: LABCONCO
Popis: Vacuum pump oil

Katalogové číslo: (LBCP3980422)
Dodavatel: LABCONCO
Popis: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.
Měrná jednotka: 1 * 1 KS


Dodavatel: LABCONCO
Popis: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Katalogové číslo: (LBCP110410021)
Dodavatel: LABCONCO
Popis: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.
Měrná jednotka: 1 * 1 KS

Environmentally Preferable


Cena na vyžádání
Omezené množství produktu na skladě. Zboží může být k dispozici v jiném skladě poblíž vašeho sídla. Přesvědčte se, že jste přihlášení na stránky, abyste mohli vidět dostupné položky na skladě. Pokud je stále zobrazeno call a potřebujete asistenci, volejte na číslo 321 570 321.
Omezené množství produktu na skladě. Zboží může být k dispozici v jiném skladě poblíž vašeho sídla. Přesvědčte se, že jste přihlášení na stránky, abyste mohli vidět dostupné položky na skladě. Pokud je stále zobrazeno call a potřebujete asistenci, volejte na číslo 321 570 321.
Daná chemikálie je regulována dle platné legislativy a bude vyžadováno vyplnění formuláře. Jeho včasným vyplněním uspíšíte dodání produktu.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Tento produkt je zablokován vaší organizací. Kontaktujte své nákupní oddělení pro více informací.
Původní produkt již není k dispozici. Zobrazen je náhradní produkt.
Tento produkt již není k dispozici. Podobné produkty můžete vyhledat pomocí VWR katalogových čísel nebo čísel dodavatele uvedených výše. Pokud potřebujete další asistenci, zavolejte na telefonní číslo zákaznického servisu VWR 321 570 321.
no targeter for Bottom