Hledali jste: VICI JOUR RESEARCH

Dodavatel: VICI JOUR RESEARCH

Popis: These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.

Katalogové číslo: (JOURJR-S-40008)

Dodavatel: VICI JOUR RESEARCH

Popis: O-ring, FEP coated, GL45 thread

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: VICI JOUR RESEARCH

Popis: In-line filter, PEEK, Bal.: 1 SET

Dodavatel: VICI JOUR RESEARCH

Popis: GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.

Dodavatel: VICI JOUR RESEARCH

Popis: Connectors for low pressure applications are machined from PEEK.

Dodavatel: VICI JOUR RESEARCH

Popis: These sample loops are made from PEEK tubing and fittings. Mechanically strong, chemically inert polymer ideal for HPLC applications. Softener-free polyethylene caps are used to avoid contamination of the tubing.

Katalogové číslo: (JOURJR-9000-0001)

Dodavatel: VICI JOUR RESEARCH

Popis: This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: VICI JOUR RESEARCH

Popis: Titanium frits are preferred over stainless steel frits for the application related to the analysis of sensitive substances such as biomolecules.

Dodavatel: VICI JOUR RESEARCH

Popis: These VICI Jour sample loops are made of high quality stainless steel 316.

Dodavatel: VICI JOUR RESEARCH

Popis: The Last Drop filter/sparger combines filtration and sparging in a single unit. The PTFE housing contains a mobile phase filter with either a stainless steel or PTFE filter element. Connect the solvent line to the stepped connector, which accommodates 1,5, 2,2, and 3,5 mm ID tubing. A 1/4"-28 fitting connector connects a 1/8" helium line connects to the 10 µm sparger. Both connectors are PEEK.

Dodavatel: VICI JOUR RESEARCH

Popis: VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Katalogové číslo: (554-1103)

Dodavatel: VICI JOUR RESEARCH

Popis: This is the ideal tool for cutting ¹/₁₆ and ¹/₈" stainless steel tubing, leaving smooth, uniform cuts requiring a minimum of deburring and/or reaming.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (554-1154)

Dodavatel: VICI JOUR RESEARCH

Popis: Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Měrná jednotka: 1 * 6 KS

Akce

Katalogové číslo: (554-1071)

Dodavatel: VICI JOUR RESEARCH

Popis: UNION,PEEK,HEX-HEAD NUT LONG 1 * 6 KS

Měrná jednotka: 1 * 6 KS

Akce

Katalogové číslo: (JOURJR-T-079-M10)

Dodavatel: VICI JOUR RESEARCH

Popis: [EN]TUBING ETFE 1/16'' OD X 0.20 MM ID 1 * 10 m

Měrná jednotka: 1 * 10 m

Akce

Katalogové číslo: (JOURJR-9000-0003)

Dodavatel: VICI JOUR RESEARCH

Popis: KIT, OPTI-KAPPE WITH 1 L SAFETY-COATED G 1 * 1 KS

Měrná jednotka: 1 * 1 KS

Akce