Hledali jste: EU00003VWRC

Dodavatel: MACHEREY-NAGEL

Popis: Digestion of the sample is an important step in photometric water analysis. The NANOCOLOR® VARIO 4 heating blocks with 24 holes for 16 mm Ø test tubes perform all required sample digestions in water and waste water analysis quickly and safely. The unit features 4 pre-programmed heating times: 30/60/120 min or continuous and has 8 free memory locations for individual heating times. There are 5 pre-programmed temperatures: 70/100/120/148/160 °C and 7 free memory locations for individual temperature settings. Temperature stability is ± 1 °C (according to DIN, EN, ISO and EPA methods). Warm-up time from 20 to 160 °C within 10 minutes.

Bezpečnostní list

Dodavatel: Merck

Popis: Reliability, speed, precision and future compatibility with the extensive range Spectroquant® kits are the unmistakable hallmarks of thermoreactors from Merck, combined with the simplest possible operation and highest user safety.

Bezpečnostní list

Dodavatel: Cole-Parmer

Popis: Choose a heater, then blocks to suit your application needs!

Dodavatel: ASYNT

Popis: The DrySyn heating block range is the alternative to oil baths and heating mantles. The systems offer clean, safe synthesis for single or multiple reactions.

Dodavatel: HAEP LABOR

Popis: Block Thermostats for two blocks featuring high temperature accuracy, rapid heating times and even temperature distribution. The TH 21 unit features Easy Control for quick and simple sample handling.

Dodavatel: LABCONCO

Popis: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Katalogové číslo: (ASYNADS2-2)

Dodavatel: ASYNT

Popis: The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (HACHLTV073)

Dodavatel: Hach

Popis: Block heater/cooler, Hach®, LT 20, Thermostatic block heater, bench-top, 80 % relative humidity, non-condensing, Teplotní rozsah: 10...30 °C

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: ASYNT

Popis: For controlled cooling of 25 to 1000 ml flasks without using jacketed reaction vessels. Units allow active temperature control from +150 to −30 °C (depending on circulator specification).

Dodavatel: Hach

Popis: Digital block heaters which can hold one or two heating blocks, units allow cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. Heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings.

Dodavatel: HAEP LABOR

Popis: Block heater block, Block, BO 37, without holes, height 37 mm

Dodavatel: Hach

Popis: A digestion step often has to be carried out before key parameters can be determined. For these parameters, the LT 200 thermostat complements the LANGE cuvette test system. Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The LT 200 has a digital timer with an automatic switch-off and acoustic signal. Two transparent splash protection lids cover the thermostat while it is heating. The integrated over-temperature feature and the insulated external casing provide additional safety.