Hledali jste: Homogenizátory stolní

Katalogové číslo: (432-0367)

Dodavatel: VWR Collection

Popis: The VWR® Bead Mill homogeniser is a part of the newest generation of Bead Mill homogenisers. This economical system is specifically designed for grinding, lysing and homogenisation of up to 16 samples. Using sample tubes pre-filled with a variety of lysing beads, the VWR Bead Mill vigorously and uniformly shakes the tubes providing an efficient, consistent high yield and quality homogenisation usually in less than 40 seconds.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (412-0167)

Dodavatel: VWR Collection

Popis: Kulový mlýn pro rozmělňování vzorků s malým objemem. Zařízení lze rovněž použít pro třepání/míchání mikrozkumavek a mikrodestiček. Zařízení má široký rozsah použití v různých odvětvích vědy od geologie po biotechnologii.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: VWR Collection

Popis: Tyto kompaktní homogenizátory jsou vhodné pro všechny standardní dispergační úkoly a intenzivní míchání. Jednotky jsou robustní a jejich stabilita zabraňuje pulsačním oscilacím a vibracím, je také jednoduchá a bezpečná výměna agregátů pro různé úkoly.

Akce

Katalogové číslo: (432-0366)

Dodavatel: VWR Collection

Popis: The VWR® 4-place Mini Bead Mill homogeniser is compact and powerful.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (441-0750)

Dodavatel: KINEMATICA

Popis: Stand model, digital, volume range 0,1 ml to 10 litres. Powerful unit for a wide range of dispersing and homogenising applications in the laboratory using the rotor/stator principle. Remote operation can be achieved with PC control using the supplied software and selection of the AUTO–mode.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (431-1268)

Dodavatel: KINEMATICA

Popis: Stand model, volume range 0,05 to 2500 ml for dispersing, homogenising, extractions, cell disruption, mixing, emulsifying and suspending. This model replaces the PT 1600 E and the PT 2100 incorporating the best aspects of both models.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (431-0194)

Dodavatel: KINEMATICA

Popis: Stand model, volume range 0,1 ml to 30 litres. The powerful PT 6100D was designed to deliver exactly reproducible homognising conditions for volumes up to 30 litres with the option to select and vary speed and time of operation, whilst monitoring the temperature. The unit can be controlled via the membrane keypad or from a PC using KIN software via an RS232 interface.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (432-0300)

Dodavatel: KINEMATICA

Popis: Stand model, volume range 0,1 to 10000 ml. Benchtop homogeniser with powerful motor and space-saving slimline design, which is easy to handle. Ideal for any dispersing and homogenising task. Interchangeable drive extensions mean different types of stand can be used.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: VWR Collection

Popis: VWR® Bead Mill MAX je prémiový model řady homogenizérů VWR Bead Mill. VWR Bead Mill MAX slouží k mletí, lýze a homogenizaci nejnáročnějších vzorků s opakovatelnými výsledky. Jedinečný pohyb držáku zkumavek zajišťuje vnitřní pohyb kuliček, omezuje víření a vytváří největší nárazovou sílu ze všech kuličkových mlýnů na trhu.

Akce

Dodavatel: IKA

Popis: Model stojanový, rozsah objemu 1 až 2000 ml. Homogenizátor T 25 je ideální pro aplikace, jako je homogenizace vzorků odpadních vod, pro použití v laboratorních reaktorech, dispergační práce pod vakuem/tlakem a příprava vzorků v lékařské diagnostice.

Katalogové číslo: (431-0317)

Dodavatel: IKA

Popis: Universal disposable disperser system with disposable sample tubes that can be hermetically sealed. Provides protection and security from infectious sample materials, toxic substances or substances with strong odours.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: MP Biomedicals

Popis: Metal bead lysing matrix contains 3,175 mm diameter stainless steel.

Bezpečnostní list

Katalogové číslo: (ICNA116004500)

Dodavatel: MP Biomedicals

Popis: FastPrep®-24 is used to homogenise biological samples. It lyses thoroughly and quickly any tissues and cells and thus allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Měrná jednotka: 1 * 1 KS

Akce

Katalogové číslo: (IKAA25002500)

Dodavatel: IKA

Popis: The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3000 to 25000 rpm for working volumes of 1 to 2000 ml (H2O). The S 25 EC-T-C-18G-ST tool allows temperature measurement and operation time detection through RFID. Device overheating is prevented by continuous temperature monitoring and the setting of temperature limits. The detection of operating time serves to guarantee regular maintenance.

Měrná jednotka: 1 * 1 KS

Akce

Dodavatel: IKA

Popis: The LABOR-PILOT is a compact and multi-purpose inline laboratory dispersing machine. It is designed for solid-liquid mixing, homogenising, emulsifying, suspending and wet milling. The LABOR-PILOT 2000/4 is suitable for wide range of applications, particularly in the chemical, cosmetic, pharmaceutical, plastics, colours and food industries. It is uniquely designed with advanced technology and is available with six interchangeable modules.

Dodavatel: IKA

Popis: The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.